collapseos/kernel/ti/kbd.asm

; kbd
;
; Control TI-84+'s keyboard.
;
; *** Constants ***
.equ	KBD_PORT	0x01

; *** Code ***

; Wait for a digit to be pressed and sets the A register ASCII value
; corresponding to that key press.
;
; This routine waits for a key to be pressed, but before that, it waits for
; all keys to be de-pressed. It does that to ensure that two calls to
; waitForKey only go through after two actual key presses (otherwise, the user
; doesn't have enough time to de-press the button before the next waitForKey
; routine registers the same key press as a second one).
; 
; Sending 0xff to the port resets the keyboard, and then we have to send groups
; we want to "listen" to, with a 0 in the group bit. Thus, to know if *any* key
; is pressed, we send 0xff to reset the keypad, then 0x00 to select all groups,
; if the result isn't 0xff, at least one key is pressed.
kbdGetC:
	push	bc
	push	hl

	; During this GetC loop, register C holds the modificators (Alpha, 2nd)
	ld	c, 0
	; loop until a digit is pressed
.loop:
	ld	hl, .dtbl
	; we go through the 7 rows of the table
	ld	b, 7
	; is alpha mod enabled?
	bit	0, c
	jr	z, .inner	; unset? skip next
	ld	hl, .atbl	; set? we're in alpha mode
.inner:
	ld	a, (hl)		; group mask
	call	.get
	cp	0xff
	jr	nz, .something
	; nothing for that group, let's scan the next group
	ld	a, 9
	call	addHL		; go to next row
	djnz	.inner
	; found nothing, loop
	jr	.loop
.something:
	; We have something on that row! Let's find out which char. Register A
	; currently contains a mask with the pressed char bit unset.
	ld	b, 8
	inc	hl
.findchar:
	rrca			; is next bit unset?
	jr	nc, .gotit	; yes? we have our char!
	inc	hl
	djnz	.findchar
.gotit:
	ld	a, (hl)
	or	a		; is char 0?
	jr	z, .loop	; yes? unsupported. loop.
	cp	0x80		; is it alpha?
	jr	nz, .notalpha
	set	0, c
	jr	.loop
.notalpha:
	
	; wait until all keys are de-pressed
	push	af		; --> lvl 1
.wait:
	xor	a
	call	.get
	inc	a		; if a was 0xff, will become 0 (nz test)
	jr	nz, .wait	; non-zero? something is pressed

	pop	af		; <-- lvl 1

	pop	hl
	pop	bc
	ret
.get:
	ex	af, af'
	ld	a, 0xff
	di
	out	(KBD_PORT), a
	ex	af, af'
	out	(KBD_PORT), a
	in	a, (KBD_PORT)
	ei
	ret

; digits table. each row represents a group. first item is group mask.
; 0 means unsupported. no group 7 because it has no keys.
; 0x80 is a special value for ALPHA key which is never returned directly.
.dtbl:
	.db	0xfe, 0, 0, 0, 0, 0, 0, 0, 0
	.db	0xfd, 0x0d, '+' ,'-' ,'*', '/', '^', 0, 0
	.db	0xfb, 0, '3', '6', '9', ')', 0, 0, 0
	.db	0xf7, '.', '2', '5', '8', '(', 0, 0, 0
	.db	0xef, '0', '1', '4', '7', ',', 0, 0, 0
	.db	0xdf, 0, 0, 0, 0, 0, 0, 0, 0x80
	.db	0xbf, 0, 0, 0, 0, 0, 0, 0, 0x7f

; alpha table. same as .dtbl, for when we're in alpha mode.
.atbl:
	.db	0xfe, 0, 0, 0, 0, 0, 0, 0, 0
	.db	0xfd, 0x0d, '"' ,'W' ,'R', 'M', 'H', 0, 0
	.db	0xfb, '?', 0, 'V', 'Q', 'L', 'G', 0, 0
	.db	0xf7, ':', 'Z', 'U', 'P', 'K', 'F', 'C', 0
	.db	0xef, '_', 'Y', 'T', 'O', 'J', 'E', 'B', 0
	.db	0xdf, 0, 'X', 'S', 'N', 'I', 'D', 'A', 0x80
	.db	0xbf, 0, 0, 0, 0, 0, 0, 0, 0x7f