ti/lcd: clear screen on init

LCD RAM persists between reboots, makingit necessary to clear it.

ref #41
This commit is contained in:
Virgil Dupras 2019-11-08 21:54:03 -05:00
parent c896b77143
commit bb2e528b65

View File

@ -35,35 +35,32 @@ lcdInit:
xor a
ld (LCD_CURROW), a
; Clear screen
call lcdClrScr
; Enable the LCD
ld a, LCD_CMD_ENABLE
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
; Hack to get LCD to work. According to WikiTI, we're to sure why TIOS
; sends these, but it sends it, and it is required to make the LCD
; work. So...
ld a, 0x17
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
ld a, 0x0b
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
; Set some usable contrast
ld a, LCD_CMD_CONTRAST+0x34
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
; Enable 6-bit mode.
ld a, LCD_CMD_6BIT
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
; Enable X-increment mode
ld a, LCD_CMD_XINC
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
ret
@ -78,11 +75,23 @@ lcdWait:
pop af
ret
; Send cmd A to LCD
lcdCmd:
out (LCD_PORT_CMD), a
jr lcdWait
; Send data A to LCD
lcdData:
out (LCD_PORT_DATA), a
jr lcdWait
; Turn LCD off
lcdOff:
push af
ld a, LCD_CMD_DISABLE
call lcdWait
call lcdCmd
out (LCD_PORT_CMD), a
pop af
ret
; Set LCD's current column to A
@ -90,8 +99,7 @@ lcdSetCol:
push af
; The col index specified in A is compounded with LCD_CMD_COL
add a, LCD_CMD_COL
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
pop af
ret
@ -100,8 +108,7 @@ lcdSetRow:
push af
; The col index specified in A is compounded with LCD_CMD_COL
add a, LCD_CMD_ROW
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
pop af
ret
@ -120,26 +127,22 @@ lcdSendGlyph:
.loop:
ld a, (hl)
inc hl
call lcdWait
out (LCD_PORT_DATA), a
call lcdData
djnz .loop
; Now that we've sent our 7 rows of pixels, let's go in "Y-increment"
; mode to let the LCD increase by one column after we've sent our 8th
; line, which is blank (padding).
ld a, LCD_CMD_YINC
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
; send blank line
xor a
call lcdWait
out (LCD_PORT_DATA), a
call lcdData
; go back in X-increment mode
ld a, LCD_CMD_XINC
call lcdWait
out (LCD_PORT_CMD), a
call lcdCmd
pop hl
pop bc
@ -157,6 +160,49 @@ lcdLinefeed:
pop af
ret
; Clears B rows starting at row A
; The LCD will then be set back at row A, column 0
; B is not preserved by this routine
lcdClrX:
push af
call lcdSetRow
ld a, LCD_CMD_8BIT
call lcdCmd
.outer:
push bc ; --> lvl 1
ld b, 11
ld a, LCD_CMD_YINC
call lcdCmd
xor a
call lcdSetCol
.inner:
call lcdData
djnz .inner
ld a, LCD_CMD_XINC
call lcdCmd
xor a
call lcdData
pop bc ; <-- lvl 1
djnz .outer
ld a, LCD_CMD_6BIT
call lcdCmd
pop af
ret
lcdClrLn:
push bc
ld b, FNT_HEIGHT+1
call lcdClrX
pop bc
ret
lcdClrScr:
push bc
ld b, 64
call lcdClrX
pop bc
ret
lcdPutC:
cp ASCII_LF
jp z, lcdLinefeed