Add Warmth to Your Home With a Fireplace Wall Mount
Create ambiance and warmth in your home, office or commercial space by installing a fireplace wall mount. These units are easy to set up and have mounting brackets that can be used to hang them or for recessing into a wall.
Follow the steps on the site of the manufacturer for a quick, easy installation. Make sure that the bottom of the fireplace and wall-mounting bracket are able to fit together. Then, secure the fireplace to the wall.
Size
A wall mounted electric fireplace can be a focal point within an area that provides warmth and ambience. They are available in a variety of sizes to match most all spaces. A smaller unit would be ideal for a bedroom, while a larger one could be used in the living room or family room. Some models even offer a recessed option for installing them in a flush position against the wall to create an uncluttered appearance.
The height of the fireplace wall mount can also affect the appearance of the room. Many people place them higher up on the wall to create a dramatic effect. They are usually 6 to 12 inches above the floor. Some prefer to place the TVs at a standard height of 4.5-5 feet. This lets them be seen by most people sitting in the room.
Whatever size you select regardless of the size you choose, there are a few important aspects to take into consideration to ensure that your fireplace is safe and efficient. You should keep all combustibles within three feet away from the fireplace including furniture, drapes, and other objects. Moreover, you should ensure that the mounting brackets are securely attached to the studs, if possible. If you can't find studs you can use anchors made of plastic. This will ensure that the fireplace will not be pulled out.
When choosing a fireplace mount, it is important to take into consideration the amount of heat it creates. In general, you should select a model which produces approximately the same amount as an average electric heater. Using this guideline you can be sure that your new fireplace will be able to provide enough additional heating for the entire space.
Certain fireplaces come with distinct features that differentiate them from the competition. Certain fireplaces have remote control with adjustable settings for brightness, and no-heat mode. They also come with cool-to-the-touch glass and realistic LED flames. Other notable features include a convenient built-in shelf for holding electronics, and an easy installation process that doesn't require professional help.
Installation
Unlike a built-in electric fire that requires a hard-wired connection to the electrical system of your home, a fireplace wall mount is semi-permanent. It can be installed directly on a wall, or into a bracket that is then fixed to the wall. It is important to choose a location that is close enough to an electrical outlet for the power cord to reach, while also providing sufficient clearance to nearby objects as per the recommendations of the manufacturer in the owner's manual.
Before beginning the installation process, ensure that your fireplace is in good condition by plugging it into and playing around with its LED lights and the heat settings. This will let you know whether it is ready for the installation or if it needs to be further tested.
Make sure you have the area ready for in which you'll install your fireplace mount. Depending on the type of fireplace, you may require an extension on the wall. You may also want to cover the wall with drywall. In the latter case make sure you use proper drywall techniques such as mudding and taping, and allow it to dry completely before continuing.
After the walls have been prepared and the brackets are attached to the wall with screws. The brackets should be placed into the studs that are in the wall behind the drywall. This will help to prevent the fireplace from being pulled away from the wall later on.
After the bracket has been secured, it's now time to mount the fireplace. The design of the fireplace can differ however, there will always be a ledge on which the fireplace rests and a place to connect it to brackets on top. You can then add any additional media, such as logs or embers.
Some models allow you to connect the firebox and screen to the wall bracket. This makes the installation even simpler however it is essential to check that everything fits correctly and is tight before finishing.
Once the fireplace is in position, you can complete the design by screwing or tacking the bracket to the wall and trimming any wires that are not needed. You can also consider using paintable wire covers to hide the power cord, if you want.
Safety
A fireplace wall mount allows you to warm your home and save valuable floor space. However, it is essential to take safety precautions when using this type of fireplace. The first step is to ensure that the unit is grounded to avoid electric shock. It is also important to follow the manufacturer's guidelines to ensure proper use.
While it is possible find wall-mounted electric fires which don't produce any heat, the majority come with a heater to maximise the authenticity and ambiance of the flame effects. This is usually in the form of a fan-forced heating device that is able to blow air through a heating element, but some models may feature an infrared heating element too.
When the fireplace is installed, you should be careful not to touch the hot surface, since this could cause burns and damage to the appliance. To minimize the risk of fire keep combustibles at a minimum of three feet away from the fireplace. Be sure not to block vents at the rear of the fireplace.
There are additional safety features to be a lookout for when choosing an electric fireplace wall mount. You should, for example ensure that the product has an emergency shutoff feature to prevent fires or overheating. It's also a good idea to choose a unit that produces a lesser amount of heat, since it will help you save energy.
The material used to surround is also crucial. Select a material that is safe for pets as well as children such as wood veneers, steel or glass. It is also recommended to select a model that has a display or remote control to make it easier to operate.
There are many types of wall-mounted fireplaces, such as electric and ethanol. The ideal fireplace for you will depend on your budget and the home's style. You can be certain to add warmth and class in your home, whether you select an ethanol or electric fireplace. However, you should always adhere to the safety guidelines of the manufacturer and ensure that your family, friends and pets safe while using this fireplace.
Style
The style of the fireplace wall mount will determine the way it appears on your home's walls. Certain models are designed to stand out, while others blend into the décor of the room. A contemporary model, such as the Streamlined electric wall fireplace has a sleek front face with a minimalist design. It has top venting which allows heated air to flow smoothly, while maintaining the elegant design of the fireplace. Its flat-mounted design and easy-to operate remote make it easy to operate.
There are also wall-mounted electric fireplaces with mantels that are more traditional in appearance. These units are perfect for homes with an open hearth, or who wish to transform their fireplace that burns wood into an electric ethonal fire without chimney. These flat-wall fire places come in various sizes and include a shelf to display decorations. They're an excellent choice for living rooms, bedrooms, and home offices.
Gas wall-mount fireplaces are a great option for those looking to create a warm and welcoming atmosphere in their home. They come with a traditional log-set and are available in several frame styles including natural and black. These units also feature an adjustable LED flame color and ember bed for a customized design. Some models even come with a built-in TV mount for additional functionality.
Some models can be mounted directly on the wall, whereas others are designed to be completely recessed into a wall. The Allusion wall-mount fireplace has a small footprint which permits it to be installed into 2x6 frame walls. But, you can add a trim skirt to the exposed portion. The Allusion comes with a convenient remote with multiple temperature settings, so you can enjoy the fireplace throughout the year.
Surface-mounted electric fires typically project between 4 and 6 inches into the room. They are therefore much easier to install than models that are built into a wall cavity or recessed into a wall. Renters will also be pleased with the ease of installation since they don't need to be concerned about drilling holes into their walls. You can simply remove or relocate the fireplace when you move.