We couldn't get a tilde!

I've tested that it works in emulation. The only test left is the
real deal my a Sega Master System.

A ~C! override can, if it wants, go put an error code in there,
which ~AT28 does.

This way, after a copy or xcomp process directly to EEPROM, one
can verify whether all bytes were successfully written by checking
whether "~C!ERR C@" is zero.

They're only used once.

Also, turn AT28! and AT28, into ~AT28, pluggable into ~C!.

~AT28 doesn't check for mismatches. It was too complicated to turn
a mismatch into a compiled word we would jump to next. Data
integrity has to be checked through another path.

Also, remove MOVEW. Without indirect memory access, this word
doesn't make sense. Some AVR-specific words will have to be
defined.

This will facilitate the development of a solution for
cross-compiling directly to EEPROM.

I got bitten again, I've over-designed my solution. The last time
it happened, it was that memory mapping thing I was wanting to add.

The indirect memory access feature I was adding was to solve a
specific problem: Allow Collapse OS to cross-compile directly on a
AT28 EEPROM.

It began well. As long as we were staying in the assembler realm,
things were looking good. However, when we got into the xcomp realm
(B260), things became ugly, and I had to creep up indirection where
I didn't want to.

All of this because I wanted to solve my initial problem in a
slightly more generalized way. The broad idea was that these indirect
memory access could allow xcomp into a broad kind of memory-like
devices.

This idea broke on the "@" part of the equation. If I want
indirections to be two-way and allow xcomp to work properly, I have
to add this indirection to FIND (and possibly others) and this just
isn't practical or elegant.

So, I'm taking a step back and accepting that the solution I design
for now is exclusively for the AT28. What I'm thinking is to add a
low-level hook for memory writing, at the assembly level.

Splitting a word into MSB/LSB pairs happens often and is worth, I
think, native words. Also, I'm going to need it in the upcoming
commits.

This allows SMS xcomp to use ALLOT0 instead of ZFILL,

Also, rename "Addressed devices" to "Indirect memory access".

I do this because I need to add indirect versions of !, @ and ,
to allow boostrapping directly to EEPROM and that A,, thing I've
added to assemblers felt like really bad names.

With this change, I'd like to generalize the use of the * suffix
for aliases.

This word, suitable to plug to A, , increases HERE before doing its
verification to minimize waiting time: While we increase HERE, the
AT28 has the time to do its programming, and thus we'll need to idle
for less time afterwards.

Also, made the mismatch check silently ignore MSB. Previously, writing
a value larger than 0xff with AT28! would always result in a mismatch.

So far, only the first 400 sectors of the disk image are accessible.

TODO: add keybindings to swap floppies on the emulated machine.

Not complete yet, but has @KEY and @DSP, enough to get prompt.

During the recipe overhaul, I forgot to carry PS/2 schematics over.
Also, the recipe should go in hw/z80 because it's specific to Z80.

Add an example, which I think helps a lot to grasp the idea.

Also, improve comments in Z80 boot code.

This brings us a bit closer to TYPE from Forth 2012. I don't think
I'll add TYPE (sig "addr len") anytime soon because there is few
use cases for it, but having "STYPE" instead of "(print)" feels
cleaner.

The switch name was confusing.

Having the signature generation code in /tools prevents self-hosting
on the SMS.

Doing SPI bit-banging through a controller port is already really
slow, but doing so with the Forth version of (spix) was really,
really slow.

With this pure z80 version of (spix), it's more bearable.

At-XY+EMIT is slow compared to direct CELL! usage. It is seen very
clearly on a SMS when VE is doing its initial clrscr (yes, I could
manage to load VE from a SD card and run it on a real SMS!).

The grid protocol wasn't there when I wrote VE initially. I only had
AT-XY. Now that we have a solid protocol to build on, let's do it.

I hadn't noticed yet, but making CVM use the Grid subsystem made
me lose scrolling. It's fine because that scrolling was "artificial"
in the sense that it was provided by curses, not Collapse OS and I
prefer having something that closer emulates a real machine.

However, CVM didn't properly clear the new line when entering it.
Fixed.

Scrolling behavior will come back when it's implemented in the Grid
subsystem.

In CURSOR!, I was using a write commande to read from VRAM and the
emulator didn't properly behave and did as if everything was fine.

The result on a real SMS was that the cursor would contain the
inverted glyph of the contents of the *old* cursor position.

I do this by adding an inverted version of all glyphs in the upper
range of the pattern memory. This is a big waste of the pattern
space (only one inverted character is needed at once), but it's the
simplest way to proceed. I'll change this if I ever need more
pattern space.

Also, remove _blank. It was wastefully blanking the whole memory.
Only the name table needs to be blanked on initialization.

This required the change of CURSOR! signature: we now supply it
with both old and new cursor positions.

Also, fix broken _bs in Grid subsystem.

Replace the "g" arg (glyph) with "c" (character). The reason why "g"
was used was to save a "0x20 -" operation at all CELL! implementations,
but this came with too big a drawback: it made CELL! hardly usable
outside of the Grid subsystem, mostly because the user of CELL! would
often have to do "0x20 -".

For example, I want the SMS's Pad driver to use CELL! directly instead
of having to do EMIT+XYPOS-messing-around. I would have had to do a
"0x20 -" there.

With the move of CVM's forth to the grid protocol, we've lost the
cursor's visual indication. Now, we have it back.

The challenge now is in implementing it in SMS' text mode. In mode
4, it's easy to mark a cell as inverted, but in text mode, that's
not possible.

In VE on the SMS, the first contents line would always be cleared
because of NEWLN being called when the FBUF would spit its last
char. Inconvenient...

I've added a "graphical" mode to the grid subsystem to inhibit this
behavior in a graphical situation such as in VE.

Also, write a more complete Grid documentation.

Also, fixed broken AT-XY in Grid...

Working in "blk/" folder from a modern system is harder than it
should be. Moving blocks around is a bit awkward, grepping is a
bit less convenient than it could be, git blame has troubles
following, etc.

In this commit, we modify blkpack and blkunpack to work with single
text files with blocks being separated by a special markup.

I think this will make the code significantly more convenient to
work into.

I wanted to make CVM's forth use the Grid subsystem, but doing so
would break the stage binary. Hence, this split.

Previously, display would be completely broken. We have yet to add
a way to display the "right" part of a buffer on such smaller
displays.

I'm planning on de-hardcoding columns in VE a bit to add support
for screens narrower than 67 columns. There's a lot of hardcoding.

Let's begin with not using core's LIST anymore. This allows us to
spit 1-16 numbers only at startup.

Because that mode behaves exactly like in a regular TMS9918, a new
driver for TMS9918 has been added in blkfs and SMS' VDP now uses it.

Also, fix broken 5x7 font.

I'm planning on supporting Text Mode soon, and SMS' VDP, when mode
4 is not active, behaves mostly like a regular TMS9918.

By having this behavior in a separate unit, we'll be able to use it
in other systems.