Commit Graph

384 Commits

Author SHA1 Message Date
Virgil Dupras
d1718a90c7 sms: add support for VDP's text mode
Because that mode behaves exactly like in a regular TMS9918, a new
driver for TMS9918 has been added in blkfs and SMS' VDP now uses it.

Also, fix broken 5x7 font.
2020-11-13 12:18:00 -05:00
Virgil Dupras
09c01c4a43 emul/z80: extract tms9918 unit from sms_vdp
I'm planning on supporting Text Mode soon, and SMS' VDP, when mode
4 is not active, behaves mostly like a regular TMS9918.

By having this behavior in a separate unit, we'll be able to use it
in other systems.
2020-11-12 11:13:18 -05:00
Virgil Dupras
2b8524d11e sms: CPORT_CTL is write-only!
why did I think that I could read from it?
2020-11-08 08:43:24 -05:00
Virgil Dupras
6cb310c38c emul+cvm: link to curses instead of ncurses
NetBSD doesn't have ncurses. Linking to curses doesn't seem to change
anything. Tried on OpenBSD and Ubuntu.
2020-11-07 08:45:26 -05:00
Virgil Dupras
7d568bd782 sms: simplify and solidify ports-related drivers
Add _TRA!, _THA!, _TRB!, _THB! routines to easily handle those pins'
value without stepping on other pins like the drivers previously
did. For SDC driver, it's going to be important soon because it turns
out that I can't get away with "always on" CS, so I'll need a scheme
where it's important that TH/TR pins have stable values.
2020-11-02 18:53:57 -05:00
Virgil Dupras
ce10320030 emul/z80/sms: add SPI exchange through controller port
Theoretically, it works. I can access an emulated SD card on it.

Will it work on real hardware?

I've also made SMS emulation faster. It was unbearably slow for SDC
access.
2020-10-29 19:42:19 -04:00
Virgil Dupras
97a46a7b9b emul/z80: decouple SDC and SPI
My idea of plugging a RC2014 bridge directly onto a Sega Master System
cartridge doesn't work. The SMS eats all I/O addr space, we can't use
it. Therefore, this naive idea, in the emulator, of reusing sdc.c in
sms.c as-is, doesn't work either.

I'll have to find another way of communicating to a SPI device on the
SMS. I'll probably do it through a controller port. Meanwhile, I need
to decouple SPI from SDC in the emulator code so that I can reuse
sdc.c. This is what is done here.
2020-10-29 15:01:25 -04:00
Virgil Dupras
705d68deec Move most of the high layer of comp core into the low one
With KEY and EMIT being switch words, most of the high layer can
be defined before drivers.

In addition to this change, I've compacted core blocks which were
becoming quite sparse.
2020-10-28 18:18:00 -04:00
Virgil Dupras
3198cd8d08 emul/8086/pcat: fix broken AT-XY 2020-10-25 18:42:48 -04:00
Virgil Dupras
6947fea2a8 emul/z80: add SD card support to SMS
It works (in emulation, but soon on real hardware!), but the LIST
command is awkward due to tight screen estate...
2020-10-25 16:53:58 -04:00
Virgil Dupras
490eceab6d emul/z80: flatten directory structure
I'm about to reuse sdc.c in sms.c and the old directory structure
was becoming awkward.
2020-10-25 15:58:00 -04:00
Virgil Dupras
44abcaa8f8 emul/8086: a little bit of cleanup in cpu.c
De-macroisation negatively impacts speed, but this emulator doesn't
need to be fast. Clear code is more important.
2020-10-25 14:25:12 -04:00
Virgil Dupras
8760766bb4 emul/8086: cleanup a couple of ifdefs
We assume CPU_V20 configuration at all times.
2020-10-25 14:01:46 -04:00
Virgil Dupras
5a77b80d3d emul/8086/pcat: fix broken int13h logic
I had forgotten that heads index increment before track index.
2020-10-25 12:21:44 -04:00
Virgil Dupras
ba21b6a9f5 emul/8086: add PC/AT emulator 2020-10-25 10:27:52 -04:00
Virgil Dupras
c912158744 Run "all" tests under the 8086 emulator 2020-10-24 23:38:06 -04:00
Virgil Dupras
885e7db054 emul/8086: add BLK support 2020-10-24 23:20:20 -04:00
Virgil Dupras
de9103942d emul/8086: implement AT-XY 2020-10-24 23:00:45 -04:00
Virgil Dupras
d11ac3f006 emul/8086: and we have liftoff!
Getting a Collapse OS prompt.
2020-10-24 22:06:51 -04:00
Virgil Dupras
942a50a86d emul/8086: add INT hooks 2020-10-24 21:50:44 -04:00
Virgil Dupras
939c018792 emul/8086: wip 2020-10-24 20:41:51 -04:00
Virgil Dupras
efe4b13a4e Move /emul to /emul/z80
I'm planning on adding other subfolders. 8086 for example...
2020-10-24 16:50:22 -04:00
Virgil Dupras
329219fa89 emul: copy libz80 directly into tree, pre-generated
libz80 doesn't move much anymore, there not much advantage to the
git module indirection.
2020-10-24 15:42:08 -04:00
Virgil Dupras
ae62e291e6 Update libz80 submodule 2020-10-24 14:46:21 -04:00
Virgil Dupras
46c95320af emul: bring "hw" subfolders one level higher 2020-10-24 14:37:19 -04:00
Virgil Dupras
8cecd54410 emul/sms: add PS/2 keyboard emulation 2020-10-24 11:18:48 -04:00
Virgil Dupras
cc8068f8ab emul: don't hardcode X11 keycodes in key handling routines
I thought it wasn't possible with XCB to transform keycodes into
symbols for the current keyboard mapping, but I hadn't looked
hard enough.
2020-10-23 21:33:56 -04:00
Virgil Dupras
1681e61956 emul/sms: don't hardcode name table offset
Use reg 2 as specified.
2020-10-12 21:11:46 -04:00
Virgil Dupras
1195b0313b emul/rc2014: add support for Zilog SIO
Very very simplistic, but works with our driver.
2020-09-24 21:01:14 -04:00
Virgil Dupras
91f79d1131 Move z80a from B200 to B5
The idea is to consider assemblers as "runtime" apps instead of
placing them in the "bootstrap" section of the blocks. These apps
will be used for much more than bootstrapping.

Moved its documentation to doc/asm.txt and made its code blocks
more compact.
2020-09-21 17:51:08 -04:00
Virgil Dupras
1a6a549857 Make the SPI Relay protocol support multiple devices
Working on programming AVR chips exposes a glaring omission in my
first design of the SPI Relay: not allowing multiple devices make
this task hard. I constantly have to unplug my SD card before, plug
the AVR chip holder, then play a bit, then unplug the AVR holder,
then replug the SD card...

My prototype for a SPI relay design is built, but I haven't tested
it yet. I need to adapt the code first, which is what I do here.

When the prototype is tested, I'll update the SDC recipe with a new
schema.
2020-09-17 09:48:55 -04:00
Dustin Rawlings
bc1cc591ce Replace "-ansi" with "-std=c89" in emul/Makefile
"-ansi" is not supported by tcc, but according to gcc
documentation, "-std=c89" produces identical behavior.

See: https://gcc.gnu.org/onlinedocs/gcc-3.4.2/gcc/Standards.html
2020-07-23 20:10:30 -04:00
Virgil Dupras
650481f849 z80/8086: extract 2>R code from stable ABI zone
Only its jump at 0x33 remains.

I've also fixed a strange offset oddity in 8086's (n) placement.
It was off by 2, but strangely, it ran properly. Anyway, now it's
fixed.
2020-07-05 08:03:15 -04:00
Virgil Dupras
d97012ecae Fix makefile build-from-clean-repo glitches 2020-06-30 10:24:12 -04:00
Virgil Dupras
5a2612a9c5 Add HERESTART xcomp config 2020-06-28 19:45:28 -04:00
Virgil Dupras
3068b58be5 Rename RAMSTART to SYSVARS
It's more descriptive this way. Also, I'll soon add a new HERESTART
config.
2020-06-28 18:49:30 -04:00
Virgil Dupras
490c57834f emul: update README 2020-06-27 07:53:58 -04:00
Virgil Dupras
0eb9bd090a Move zasm.sh from emul to cvm 2020-06-27 07:44:43 -04:00
Virgil Dupras
ceabc9920f move avra.sh from emul to cvm
The stage binary is now there.
2020-06-27 07:32:19 -04:00
Virgil Dupras
a65f674c74 emul: build from "cvm" instead of from itself
The C VM now runs the show.
2020-06-26 22:08:45 -04:00
Virgil Dupras
1312817117 z80: make boot binary a 2-part process
Previously, recipes that began spitting binary contents before
loading block 282 would end up with VARIABLE code in their binary,
thus breaking them. We fix this by making this loading process
2-part.
2020-06-26 21:41:17 -04:00
Virgil Dupras
4939189233 emul: make blk operations much faster
It helps a bit with staging times.
2020-06-22 06:29:00 -04:00
Virgil Dupras
dbd283758c Refer to BOOT and (uflw) by addr in stable ABI
Was previously referred to by name+find, which was wasteful.
2020-06-21 11:41:10 -04:00
link2xt
d83d12899b
MOVE: do not crash when u is 0 (#126)
This commit adds ?DUP IF guards to MOVE and MOVE- that make them exit
when u is 0. Without these guards a DO loop was executed 65535 times
instead of 0.

In particular, this fixes a crash when "105 LOAD I " is executed
immediately after boot. Block editor word "I" passes IBUF length (0)
to MOVE- and MOVE in this case, causing a crash.
2020-06-21 05:49:45 -05:00
Virgil Dupras
397ee3e3e6 Simplify word ' 2020-06-20 14:13:41 -04:00
Virgil Dupras
c571567660 emul: make verbose staging the default
I always keep it on myself. I can imagine it's especially useful to
newcomers.
2020-06-20 13:41:39 -04:00
Virgil Dupras
aca9bc9058 z80: small optimization in cell execution 2020-06-18 08:02:45 -04:00
Virgil Dupras
035532acf7 z80: remove remaining indirections in execute calls
We now have a stable ABI that is pretty cleared up...
2020-06-18 07:50:20 -04:00
Virgil Dupras
42818d25be z80: remove layers of indirection of find calls 2020-06-18 07:40:20 -04:00
Virgil Dupras
76e698157c z80: remove layer of indirection in most "next" calls
The only calls still using the stable ABI indirection are those
made before the next routine is created.
2020-06-18 07:24:47 -04:00