zybino/README.md

# zybino: LR35902ish racket language

very early days for now.

in the racket repl (comments for reader comprehension, remove before running):

```
(run-vm #x150 #x150 #x19 ; start-address, end-memory-view-addr, number-bytes-view
   '(#x3E #x69           ; LD A, $69
     #x26 #x01           ; LD H, $01
     #x2E #x67           ; LD L, $67
     #x77                ; LD (HL), A
     #x2E #x5B           ; LD L, $5B
     #x36 #xE6           ; LD (HL), $E6  ($E6 is the opcode for XOR $xx)
     #x10                ; STOP          (this instruction @ address $015B)
     #xF0                ;               (non-instruction, will be arg for previous byte)
     #x2E #x68           ; LD L, $68
     #x77                ; LD (HL), A
     #xC3 #x64 #x01      ; JP $0164
     #x10                ; STOP
     #x7D                ; LD A, L       (address $0164)
     #x10                ; STOP
     ))
```

will evaluate to:

```
PC: $0166, SP: $0000, Flags: %00000000
BC: $0000, DE: $0000
HL: $0168, AF: $6800
(HL): $60
$0150 > $3e $69 $26 $01 $2e $67 $77 $2e $5b $36 $e6 $e6 $f0 $2e $68 $77 $c3 $64 $01 $10 $7d $10 $00 $69 $60 < $0168
```

here we can see the program loaded starting from address `$0150`, including the `XOR` instruction loaded to `$015B` during execution, and the `$69` we loaded to memory, along with the result of `XOR $F0` we loaded to memory, at `$0167` and `$0168` respectively. we can also see that the `A` register is `$68`, the same as the `L` register, as the `JP` instruction executed properly and we skipped the `STOP` at address `$0163`.

## notes

currently supported instructions are:
   * `JP #addr`
   * `LD [reg], #imm`
   * `LD [reg], [reg]`
   * `XOR #imm`
   * `AND #imm`
   * `OR #imm`
   * `STOP`
   * `NOP`

all other instructions treated as `NOP`